Momik automates lighting design in Revit. Fully AS/NZS 1680 compliant. Weeks of work in minutes.
What takes weeks manually, Momik does in minutes. Fully automated lighting layout in Revit.
Every design meets AS/NZS 1680 requirements automatically. No manual norm-checking needed.
Works directly inside Autodesk Revit. No exports, no external tools, no workflow disruption.
AI-powered clash detection ensures every fixture placement is structurally valid from the start.
Reference lux levels, uniformity ratios, UGR limits, and colour rendering requirements per room type under AS/NZS 1680.
| Room / Task Type | Illuminance (Em) | Uniformity (Uo) | Glare (UGR) | Colour (Ra) |
|---|---|---|---|---|
| Open-plan office | 400 lx | ≥ 0.60 | ≤ 19 | ≥ 80 |
| Meeting / conference room | 320 lx | ≥ 0.60 | ≤ 22 | ≥ 80 |
| Reception / lobby | 200 lx | ≥ 0.40 | ≤ 22 | ≥ 80 |
| Corridor / circulation | 80 lx | ≥ 0.40 | — | ≥ 60 |
| Staircase | 80 lx | ≥ 0.40 | — | ≥ 60 |
| Toilet / WC | 160 lx | ≥ 0.40 | ≤ 25 | ≥ 80 |
| Warehouse (general) | 160 lx | ≥ 0.40 | — | ≥ 60 |
| Manufacturing (med. prec.) | 400 lx | ≥ 0.60 | ≤ 22 | ≥ 80 |
In Australia, AS/NZS 1680 sets the national standard for workplace and building illumination. Safe Work Australia / State OHS Authorities oversees technical compliance under AS/NZS 1680 Interior Lighting. Building permit applications for commercial and industrial projects require lighting design calculations. Periodic workplace inspections verify ongoing compliance with minimum illuminance requirements.
Primary industries where AS/NZS 1680 compliance is most frequently required in Australia.
Yes. In Australia, AS/NZS 1680 is adopted as the national standard for workplace illumination. Safe Work Australia / State OHS Authorities oversees compliance under AS/NZS 1680 Interior Lighting. Building permits for commercial and industrial developments require lighting calculations demonstrating conformity. Workplace safety inspections include verification of minimum illuminance levels.
Buildings that fail to meet AS/NZS 1680 requirements can receive improvement notices from Safe Work Australia / State OHS Authorities. In severe cases, occupancy permits may be revoked until lighting is retrofitted to meet minimum levels. Employers also face occupational health liability if inadequate lighting contributes to worker injuries or health issues.
Momik reads your Revit model room by room, automatically applies AS/NZS 1680 illuminance targets for each space type, calculates the correct fixture placement, quantity, and layout, and generates a fully compliant lighting design — entirely within Revit. No manual lux calculations, no spreadsheets, no cross-referencing the norm tables. Typical projects are completed in under five minutes.